October Refrigeration Repair Leicester 2026

Refrigeration Service Repair Maintenance, Bottle cooler

Location: Leicester

Contract Value: 700

Contract Duration: 5 hours

Click Here To Enlarge This Photo Of October Refrigeration Repair Leicester 2026

Project: October Bottle Cooler Repair 2026

When a customer reports warm drinks and a noisy compressor, the assumption is often that the cooler’s days are numbered. But with a bit of detective work and a steady hand, we can often turn a replacement into a repair — saving time, money, and a few bottles of cold refreshment.

System Overview

The bottle cooler is a standard upright display unit used for cold drinks and storage. On arrival, the cabinet temperature was high, and the compressor was running continuously. The evaporator fan was operational, but the liquid line was heavily frosted — a clear indicator of a refrigerant flow issue.

Manufacture Date

The data plate shows a 2018 manufacture date, making this unit only 8 years old. It uses R449a refrigerant, still fully serviceable and compliant. The coolant capacity is 0.88 kg, typical for small commercial coolers.

Fault Diagnosis

The frost buildup on the liquid line (as seen in the attached image) points to one of three common culprits:

  • Restricted capillary tube or filter drier
  • Low refrigerant charge
  • Poor airflow across the evaporator

Initial checks confirmed the evaporator fan was running correctly, eliminating airflow as the primary cause. The sight glass showed intermittent bubbles, suggesting a partial restriction or low charge. The compressor was drawing normal current, so mechanical failure was ruled out.

Repair and Testing

The system was isolated and the refrigerant recovered. A new filter drier was installed, and the capillary tube flushed to remove any wax or debris. The system was then vacuumed to 500 microns and recharged to the manufacturer’s specified weight.

After restart:

  • Suction pressure stabilized at 1.2 bar.
  • Frost no longer present the liquid line.
  • Cabinet temperature dropped from 18 °C to 4 °C in under 45 minutes.

Hand‑Over

The cooler was returned to service with a clean bill of health. The customer was advised on routine maintenance — keeping condenser coils dust‑free and ensuring adequate ventilation behind the unit. For an 8‑year‑old system, it’s performing admirably and should continue chilling bottles for some time yet.

Need refrigeration repairs or maintenance? We’re still taking service requests for bottle coolers, chillers, and air‑conditioning systems. Call today for a free estimate — quick fixes, cold results.

Back To List

Call: 07878 829 027

Get A Quote

Cookies

This website uses cookies. Please let us know if you agree to the use of these cookies :
I Accept I Decline

Privacy Policy | 3rd Party Data Processors | Disable Cookies
Cookies